The reason of making a plastic injection mould is for plastic molded parts. Some customers only buy moulds and import to local injection moulding company for production. Some other customers would like to keep the mould staying in Chinese suppliers and only import the plastic components for assemble.
When customers require us to keep the moulds in our factory for production, we do mould repair and maintenance for free and pay more attention on below points.
Anti-rust: Prevent the injection mold from rusting due to leakage, condensation, rain, fingerprints, etc. We use blue painting for protection of mould outer surface and put grease oil on mould surface when production finished and keep them on mould rack orderly.
Anti-collision: Our well-trained workers can prevent the mold from being damaged due to the breakage and the failure to spring back in place when doing plastic injection molding. And they assure to transport moulds very carefully from moulds rack to injection machining for production.
Burr or damage: prevent mold burr or damage caused by unprofessional operation with hard tools.
Mould components Missing/damage: Before and after injection moulding production, our workers need to check the mould carefully and prevent the mold from damaging due to missing or damaged components such as ejector pins breakage, missing of tie rods and washers during use.
Anti-pressure injury: Suntime workers operate well and check carefully, which can prevent the injection mold from being locked due to product residues, it will cause mold pressure injury.
Lack of enough pressure: too low pressure will damage the injection mold, we need to make sure enough pressure when do production.
Mould regular inspection: For moulds don’t have production for more than 2 months, we do regular inspection and make sure it can be used anytime when customers place production orders.
Good regular maintenance of plastic injection moulds is also a very important element to make sure smooth moulding production, it not only save possible future repair cost, but also assure the lead time of production. Suntime Precision Mould has many molds staying in factory for production and have enough experience to do maintenance, in this case, we can make sure the timely smooth production for all our customers.
Post time: Jan-06-2022
